How to Draw a Chair: 3 Easy Methods

Warning: Trying to access array offset on value of type null in /srv/users/michenermuseum/apps/michenermuseum/public/wp-includes/class-wp-block-supports.php on line 94

Warning: Trying to access array offset on value of type null in /srv/users/michenermuseum/apps/michenermuseum/public/wp-includes/class-wp-block-supports.php on line 96

A chair is one of the most important pieces of furniture in a home or office. We sit in a chair on a daily basis throughout our lives. The couch serves as a place to sit while we watch television, eat our meals, or just lounge around the house.

Drawing a simple chair is a great way to put your artistic abilities into practice and refine them. Although a chair appears to be straightforward, drawing and aligning its components requires concentration and imagination.

Fortunately, we’ve compiled a step-by-step tutorial on how to draw a chair.

How to Draw a Chair: 3 Easy Methods

Method 1:

Step 1: Draw the seat of the chair


Draw the seat of the chair starting in the very middle of your piece of writing paper. It is the part of the chair that comes into direct contact with our lower backs whenever we sit down.

Using this helpful tip, draw a vertical and horizontal line across the top and bottom of your paper to serve as reference lines.

The point at which the two lines come together is where you should draw the chair’s seating area. This guideline will ensure that your chair is perfectly aligned every time you sit down.

Step 2: Start With the Seat of the Chair


One stile or back leg should be drawn on the seat’s rear left-hand corner. The stile provides support for the chair, allowing it to remain upright and balanced.

To make the chair appear more realistic, don’t forget to draw the dimensions for each section of it.

Step 3: Draw the Stile or the Back Leg


Draw another stile or back leg on the rear right side of the seat, in the same manner as in the preceding step. The leg, on the other hand, should be extended all the way down this time.

Step 4: Draw the Crest Rail


Draw a crest rail in between the stiles on the upper part of the chair to finish it off. Drawing two parallel horizontal lines in the middle of the upper portion of the back legs will suffice to achieve this result.

The crest rail of a chair is the top rail that has been carved or profiled. When we’re sitting down, it helps to support our back, allowing us to sit more comfortably and efficiently.

Step 5: Draw the Lower Back Rail


Immediately below the crest rail, draw another rail that is identical to the one we drew in the previous step.

The rails provide support for our backs and allow us to sit up straight, allowing us to sit comfortably while still maintaining our body posture in the process.

Maintaining a slight distance between each other is important when designing the crest rail and lower back rail.

The crest rail is the one at the very top of the staircase, while the lower back rail is the one at the very bottom of the staircase.

Step 6: Draw the Front Legs of the Chair


Draw a leg on each corner of the seat, right underneath the front part of the seat, to complete the chair’s first two legs. When drawn correctly, it should be identical in appearance to the rear leg we previously sketched in the third step.

It’s important to remember that the front legs should appear slightly lower than the back legs in order to create a realistic three-dimensional illusion.

Step 7: Draw the Seat Rail on All Sides


Draw a seat on both visible sides of the chair, right underneath the seat, right underneath the seat (the front and the right side). In order to draw a seat rail, draw a horizontal line directly below the seat.

A set rail increases the durability of the chair, allowing it to support a greater amount of weight.

Step 8: Complete All Four Legs of the Chair


With only one leg remaining after drawing the three legs of the chair (two front legs and one back leg), we have completed the chair’s set of legs.

Draw a back leg right underneath the seat on the rear left side of the chair. Repeat this process on the other side. And there you have it: your chair drawing now has four complete legs! Congratulations!

Step 9: Draw the Cross Stretcher Under the Chair


In this step, we’ll be drawing the final component of the chair: the cross stretcher.

To create a rectangle shape between the front and back left legs, as well as between the front and back right legs, use a ruler. Then, in between the two rectangles that we have just drawn, draw a tilted rectangle shape in the opposite direction.

This is the result of your successful chair drawing: congratulations! All that’s left is a splash of bright and vibrant colors to bring your artwork to a successful conclusion!

Step 10: Color the chair


Last but not least, comes the most exciting part: adding color to your fantastic drawing! This is the section in which you can demonstrate your artistic abilities as well as your ability to mix and match different colors.

There are many different materials used to construct chairs, including wood, metal, acrylic, and any other long-lasting materials.

This furniture is also available in a variety of colors, the availability of which varies greatly depending on the material from which it is made.

You are free to color your chair drawing in any way you want and with any colors you want! And while you’re at it, why not experiment with different coloring materials to see what works best for you?

Method 2:

Step 1:


Begin by sketching the contours of the chair’s seat. To begin, draw an outline of a parallelogram with rounded corners using four curved lines.

Transform the two-dimensional shape into a three-dimensional seat by drawing curving lines parallel to the near sides of the shape.

Step 2:


Draw the chair’s sides with your pencil. Three short lines should be drawn from beneath the seat. Long lines are used to connect them together, resulting in the rectangular sides.

Step 3:


Create the chair leg by drawing it and erasing it as needed. Extend three long, straight lines from beneath the seat to the corner where the sides meet, starting at the bottom of the seat. Short, straight lines are used to connect the lines at the bottom of the page.

Step 4:


Draw the second leg of the chair. Draw three long, straight lines from beneath the seat and the chair’s side to the back of the chair. Short, straight lines should be used to connect them at the bottom.

Step 5:


Draw the chair’s rear leg, which extends to form the chair’s back. Make sure the leg is straight. Draw three long, curved, parallel lines that are parallel to one another.

It is recommended that two of the lines cross behind the chair’s seat and side, where they will be partially hidden. Short, straight lines are used to connect the lines at the top and bottom of the diagram.

Step 6:


Draw three parallel curved lines upward from the opposite corner of the chair, starting at the bottom of the chair. Straight lines should be used to connect them at the top.

Then, drawing two curved lines downward beneath the chair will complete the design. Ideally, one line should run from beneath the chair to disappear behind the front leg of the chair.

Using a short line, connect the other leg to the same leg on the other side. The fourth and final leg of the chair is formed by this.

Step 7:


In the space between the front and back legs of the chair, sketch in rungs, erasing as needed. Draw three parallel lines between the front and back legs to represent the front and back legs. Where the lines meet the rear leg, short, straight lines should be used to connect them.

Step 8:


Pull the backrest up. A straight line should be used to connect the sides of the chair back. Then, starting from each side, draw a straight line upwards.

A long, curved line is used to connect them at the top of the page. Create a three-dimensional appearance for the backrest by drawing a rectangle on one side and a curved line across the bottom of the backrest.

Step 9:


Draw a rung between the two sides of the chair back, erasing as necessary, to represent the chair back. Draw three straight lines between the two sides of the rectangle. Straight lines should be used to join them together at one end.

Step 10:


Fill in the blanks with color on your cartoon chair. Wooden chairs are naturally brown in color, but they can be painted to match any environment that you may create using paint. Cushions for chairs are frequently made of brightly colored fabrics.

Method 3:

Step 1: Draw the Backrest


During this step, you will be drawing lines that will be used to represent the back of your chair. In order to begin, draw six horizontal lines that are stacked on top of one another.

It is not necessary for them to be visually appealing; simply make them appear to be lines. If you’d like, you can slightly round the corners of your lines, which will improve the overall appearance of your finished chair.

Step 2: Sketch the Frame


Draw two vertical lines on either side of the horizontal lines, one on either side of the horizontal lines. They will be used as part of the chair’s outer frame and legs later on in the process of construction.

Step 3: Add More Lines


Two vertical lines should be drawn directly beside the other two lines, and they should be connected.

Step 4: Draw the Seat


After you have finished drawing the top of the chair, you can move on to drawing the seat of the chair. The seat can be found in a variety of shapes and sizes, and can be either round or square in appearance.

The seat in this tutorial, on the other hand, will have a rounded back and a rectangular front. After drawing the seat, it reminded me of the tip of a fingernail, which I thought was quite appropriate.

Step 5: Draw the Legs


After that, we’ll tackle the legs! Every chair is supported by four legs. The back two legs are connected to the backrest, and the front two legs are connected to the seating area. Take a look at the image to get a better understanding of what I’m talking about.

Step 6: Add Dimmension


Curves and corners on the legs of your chair will add depth and dimension to the piece. As you can see, the drawing becomes less flat and more solid as a result of this technique.

Step 7: Add the Details


Everything else is entirely up to you! If you want, you can decorate your chair with a design element such as a wooden appearance or some lines. It is true that this drawing is a little plain, but it is only meant to give you an idea of the fundamentals!



We hope you find this step-by-step tutorial on how to draw a chair to be informative and useful. With the help of this guide, you will be able to draw and color a chair in no time, complete with its complex features and intricate details.

Even more exciting, you can alter its physical characteristics and experiment with different color schemes as much as you want!

Leave a Comment

Exit mobile version