How to Draw a Light Bulb (For Beginners)

Our daily lives are not complete without the use of a light bulb. It is responsible for providing us with light during times of darkness.

The transformation of a seemingly ordinary object into a creative work of art is an excellent way to demonstrate your artistic abilities.

It’s possible that this is exactly what you’ve been looking for if you’ve been looking for something new to draw and practice your drawing skills with.

This tutorial will show you how to draw a light bulb step by step, in just nine easy and simple steps, which you can find here.

This tutorial includes detailed instructions as well as visual illustrations, which will make it much easier for you to draw a light bulb in no time.

We are confident that you will be able to draw a light bulb with the assistance of this tutorial, whether you are a beginner or an experienced artist.

The fact that you can customize your drawing and handpick a unique set of colors for your artwork makes this an excellent way to hone your artistic abilities!

Take some time to enjoy yourself and use your artistic abilities to draw a light bulb.

How to Draw a Light Bulb: 3 Methods

Method 1:

Step 1: Draw the Glass Done of the Light Bulb

Draw the Glass Done of the Light Bulb

Begin by drawing the light bulb’s glass casing in the manner of a traditional drawing. The upper portion of this should be fairly round, and the lower portion should be narrower. Make the underside of this part as flat as possible.

Step 2: Draw the Base

Draw the Base

The base of the light bulb should be placed beneath the dome. Draw this in two sections, with the upper section being slightly wider than the lower section and the bottom of the upper section being angled. This angle will be useful later on when drawing the screw threads.

Step 3: Draw the Bottom

Draw the Bottom

Draw the bottom of the light bulb’s base, making it narrower as it descends, and ending with a “bump-like” portion at the bottom of the base (the electrical connector).

Step 4: Draw the Screw Threads

Draw the Screw Threads

As shown in the illustration above, screw threads should be added along the base of the light bulb. These should be drawn at the same angle as the upper portion of the base that was previously sketched.

You can remove some small sections of the base’s outline where it is overlapped by the threads by erasing them slightly.

Step 5: Draw the Glass Base

Draw the Glass Base

Insert the glass base inside the completed structure (supports the inner wires added in the next step). To draw it, start with a wider section at the bottom, then a narrower section, and finally a “cap-like” shape at the very top.

Step 6: Draw the Support Wires

Draw the Support Wires

Draw some support wires from the glass base up to the top of the structure. If you’re starting from the thicker part of the base, you should have a thicker pair of wires going up and a thinner pair going up from the very top of it.

Step 7: Draw the Filament & Finish the Line Drawing

Draw the Filament & Finish the Line Drawing

In order to demonstrate the filament, connect the wires with a few curved lines. Once you are satisfied with your drawing, go over it with a black pen or marker to make it more visible. Alternatively, you can simply darken the lines with the pencil.

Step 8: Color the Light Bulb

Color the Light Bulb

It’s possible to color the light bulb by painting it yellow or light grey on the inside of the glass portion, depending on whether you want to show the light bulb turned on or off.

Also, leave a small highlight on one of its sides, as shown in the example, to indicate that it has a smooth reflective surface on one of its sides.

Fill in the gaps at the bottom of the base with a darker grey or black to represent the connector.

If you want to make the light bulb yellow, a marker can be a good coloring option because they tend to be bright, similar to the glow of a light bulb, which is what you want.

To add the greys, you can simply use a regular pencil (or whatever coloring method you like).

Method 2:

Step 1: Draw a perfect circle

Draw a perfect circle

On the upper portion of your paper, draw a perfect circle in the center. This outlines the light bulb’s cylindrical body in a radial pattern.

If you need assistance drawing a perfect circle, you can always consult a compass for assistance. It is a drawing tool that allows you to quickly and easily draw proportional circles in a variety of sizes.

Step 2: Create a Rough Sketch of the Light Bulb

Create a Rough Sketch of the Light Bulb

Draw a cone-shaped figure directly underneath the circle. The edges of the two different shapes must be perfectly aligned in order for the light bulb’s structure to be perfectly formed.

When drawing the outline, try not to press down too hard with your pencil to avoid breaking the paper.

Because you will be able to easily erase some parts of the line that you no longer require later on, it is critical to draw with light strokes.

Step 3: Refine the Outline of the Light Bulb

Refine the Outline of the Light Bulb

To refine and refine the shape of the light bulb, simply erase the bottom portion of the circle that overlaps inside the outline, revealing a refined light bulb figure.

Step 4: Draw the First Layer of the Bulb’s Cap

Draw the First Layer of the Bulb’s Cap

As shown in the illustration, draw a long, thin line directly underneath the glass bulb. This is the first layer of the base, and it is created in this manner.

The cap or base of a light bulb is responsible for three primary functions. First and foremost, it provides secure support for the light bulb when it is connected to an electrical source unit.

Second, it is responsible for transferring electricity from the primary electrical source to the light bulb. Finally, it is responsible for holding the glass bulb as well as all of the components contained within the bulb.

Step 5: Draw the Second Layer of the Base

Draw the Second Layer of the Base

In the previous step, we drew one layer of the base, and now we’ll draw another layer directly underneath that first layer.

After completing this step, you should have a base with two layers stacked on top of one another.

Step 6: Afterwards, Add the Cap’s Third Layer

Add the Cap’s Third Layer

Re-create the previous step to add a third layer to the base of the structure.

After completing this step, you should have a base with three equal layers of paint on top of it.

Step 7: Complete the Light Bulb’s Cap or Base

Complete the Light Bulb’s Cap or Base

After you’ve completed the first three layers of the light bulb’s base, it’s time to draw the bottom part of the light bulb, which is responsible for connecting the light bulb to an electrical source.

Underneath each of the three foundational layers we created in the previous steps, draw a short downward diagonal line on each side that is parallel to the other.

Then, connect the two bottom end points of each diagonal line with a slightly curved horizontal line that is slightly curved.

Step 8: Draw the Filament Support and the Contact Wire

Draw the Filament Support and the Contact Wire

Draw the wire inside the light bulb to complete your light bulb design. Draw two straight lines ascending from the base, starting at the bottom.

You should be able to draw multiple spiral lines connecting both of the lines we drew just now once you have reached your desired length for the contact wire, which should be about an inch.

Step 9: Make the Light Bulb Appear Illuminated

Make the Light Bulb Appear Illuminated

For an even more dramatic effect, draw multiple upright lines around the glass bulb to give it more depth. This creates the illusion of luminescence and gives the appearance that the light bulb is glowing, which it is not.

Having successfully drawn a light bulb, it is time to move on to the most exciting part of the process: selecting colors and coloring your drawing!

This is the section in which you can demonstrate your artistic abilities as well as your ability to mix and match different colors.

Light Bulb Drawing is Complete

The most common colors for light bulbs are the traditional white and yellow hues that are widely available. Modern light bulbs, on the other hand, are available in a variety of vibrant colors, including red, blue, green, and more!

There are many different color options to choose from when it comes to coloring the light bulb.

Enjoy yourself by experimenting with different colors and watching as your light bulb shines brightly!

Method 3:

Step 1:

drawing a circle

To begin, draw a circle around the area you want to decorate. This will assist you in drawing the outline of the bulb’s shape.

Step 2:

Draw two curved lines descending from the circle

Draw two curved lines descending from the circle, angling closer together as they go down the circle. This continues the outline of the bulb’s glass in its entirety.

Step 3:

Connect the lines using a short, curved line

A short, curved line is used to connect the lines together. The outline you’ve drawn should have the appearance of a blown-up balloon.

Step 4:

Erase the guide line left by the original circle

Remove the guide line that was left behind by the original circle.

Step 5:

Draw a curved like rectangular shape beneath the bulb

Draw a curved, rectangular shape beneath the bulb to represent the bulb’s base. In the end, this will result in the screw thread contact, which is the part of the light bulb that screws into the light bulb socket.

Step 6:

Draw a series of horizontal

Cross the base of the bulb with a series of horizontal, parallel curved lines that are parallel to one another. The threading on the metal contact is indicated by these symbols.

Step 7:

Draw two straight lines ascending at a slightly diagonal angle

Draw two straight lines ascending at a slight diagonal angle from the screw thread contact, and then connect them with a curved line.

These will come together to form what is known as the glass mount, which is comprised of the tiny arms that suspend the filament in the bulb.

A short, curved line is used to complete the contact on the underside of the screw thread.

Step 8:

Draw a looping

Draw a curved line between the arms of the glass mount that loops around itself. This is the filament, which is a tiny metal wire that produces heat and light when electricity passes through it, causing the cartoon light bulb to come to life and illuminate the scene.

Step 9:

Draw jagged lines in the shapes of the letters

A circle around the filament should be outlined with jagged lines in the shapes of the letters “W” and “V.” After that, draw a halo of straight lines around the light bulb, extending from all sides of it. Both of these characteristics are used to indicate the type of light being emitted.

Step 10:

Color your light bulb

Change the color of your light bulb. The majority of the time, bulbs are depicted as yellow or white with a grey screw thread contact on the filament.


Although a light bulb is not overly complicated, it does have a small amount of detail along the base of it.

Some light bulbs can also have slight variations in their design, but in general, a traditional light bulb such as this one will have the components shown in the illustrations.

Leave a Comment