How to Draw Words (3 Easy Methods You Should Try)

The theory behind drawing words in perspective, 3D, or another way could prove to be quite difficult to understand, as well. In order to make drawing words easier, we present you with 3 simple methods.

Our goal in writing this article is to expand our horizons creatively, to learn new things, and to push our limits. We are so excited to share this tutorial with you, which shows how to draw words step-by-step. Let’s get started!

How to Draw Words Step by Step: 3 Methods

Method 1: Draw Words in 3D

Step 1:

source: thepostmansknock.com

Shadows can only be cast by thick letters, and to cast shadows, you must make the letters thick. To begin, draw a brief phrase using thick letters.

A word processing program can type out your phrase for you, print it, then trace the letters.

Using pencil guidelines helped me write this letter more leisurely. If you wish to do the same, write your own letters.

Step 2:

source: thepostmansknock.com

Basically, we’re trying to make the letters look as if they’re sitting on the page. The shadow will do this for us. Use a pencil to lightly draw a series of diagonal, parallel lines directly over your phrase to start creating your shadow.

source: thepostmansknock.com

Assume that a light source is coming from the upper left corner of the page for these letters to appear 3D. Consequently, shadows will appear below the letters. 

Your first shadow should be drawn in the lower left corner of the letter. Place your ruler parallel to the slant lines you drew earlier so that it is parallel to that corner. 

Make a pencil line extending 3/16″ (* 5 mm) from the corner of the letter.

source: thepostmansknock.com

In addition to your diagonal lines, draw additional 3/16′′ lines parallel to the remaining corners.

Connect the vertically and horizontally drawn 3/16′′ lines. Make sure that the connections are parallel to the edges of the original letter.

source: thepostmansknock.com

You draw 3/16′′ lines from the corners and then connect them no matter what letter you’re working on.

source: thepostmansknock.com

In some letters, like an “A”, there is no clear corner. If that’s the case, imagine what the shadow would look like if these were real letters and there was a real light source. Create the shadow in that manner.

Some Tips:

It’s okay if your shadows cross neighboring letters! Keep in mind that all shadows go behind the letters. Observe the shadow of the “M” below; it remains behind the “O”.

source: thepostmansknock.com

A round letter like “O” has no corners, of course. The shadow should extend down from the upper right corner of the letter, where the letter starts to descend sharply. 

There is a space at the end of the letter’s descent, where you can draw another line. Link those two lines together. You should also add a shadow to the inside of the letter!

source: thepostmansknock.com

Step 3:

Even though your letters are unfinished, they should still appear 3D once you have completed the pencil guidelines.

source: thepostmansknock.com

You can now fill in the shadows with any color you like. Due to my desire for a classic look, the shadows are filled in with black.

source: thepostmansknock.com

Finish filling in all the shadows on your letters.

source: thepostmansknock.com

After the ink has dried (by a few hours, if your climate is warm enough), erase any pencil marks.

source: thepostmansknock.com

Before erasing pencil lines, you must wait until the ink has completely dried. Premature erasure could lead to a smudge that would ruin all your hard work!

Method 3: Draw Letters with Diagonal Angles

Step 1: The front shape of the letter is a good place to start. This letter is just a “K”.

source: helloartsy.com

Step 2: Afterwards, all of the corresponding corners of the letter must be drawn all the way to the vanishing point. To ensure the next step will line up perfectly, be sure to use a ruler.

source: helloartsy.com

Step 3: Keep the front structure of the letter in mind when finishing the 3D letter in space. You can see in the drawing above that the blue lines are horizontal, while the orange lines are vertical. The next step will be to create the slants in the letter.

source: helloartsy.com

Step 4: Make sure that you have parallel front and back sides when dealing with slanted angles. A green highlight appears on slanted lines in the image above.

source: helloartsy.com

Step 5: For example, our letter “K” has two distinct angles on our slanted portion. On both sides of the page, you can see purple diagonal lines that are parallel. Learn how to color-code your lines when drawing complex shapes in perspective so you know which lines go in which directions.

Note how the image above has been color-coded! The colored lines in each group represent a pair of lines that must be parallel to one another.

source: helloartsy.com

Step 6: We have completed drawing a letter after another little tidying up!

source: helloartsy.com

Method 3: Draw Letters in Perspective

Step 1:

source: lettering-daily.com

A quarter of the way down the page, draw your horizon line. To erase the pencil lines you have drawn later, lighten the weight of your guides. 

There should be dots at both ends of this line near the edges of the page. These little squares represent your vanishing points. 

All of your non-vertical lines will converge on one of these points, which is why they’re crucial.

Step 2:

source: lettering-daily.com

On the left hand side of the page, about halfway down, draw a 2″ vertical line. The following is the first page of a letter that we should receive as soon as possible. Standing inside your page, you would see the word from your point of view.

If the vertical lines at the bottom of the page do not all meet at a 90 ° angle (or perpendicular), your angles won’t look quite right.

If you don’t have a T-Square ruler, you can use a transparent ruler to square your ruler. Alternatively, you can align your short ruler side edge with the bottom of your page if you don’t have either of those tools.

Step 3:

source: lettering-daily.com

You can make this line vanishing by connecting the two vanishing points at its top and bottom. Your words are fading away from you with each passing second, as the outline takes shape.

Step 4:

source: lettering-daily.com

Next, determine how wide the letter nearest it is. In my case, it’s about half an inch wide. Two vertical lines should be drawn on either side of the line of sight between your guidelines.

Step 5:

source: lettering-daily.com

Using the alphabet, we shall turn every letter of the alphabet into an outward-facing letter, with “E” at the beginning of the piece as our closest neighbor.

If you examine the letter carefully, you will see that its back is angled downward. Your right vanish point can be connected to the apex of the farthest-left vertical line to give your word depth.

Step 6:

source: lettering-daily.com

Nevertheless, stay tuned for more awe-inspiring content! We’re determining the width of the other letters. As the letters recede into the distance, the width of the letters cannot remain the same. Using a ruler trick, we’ll do this.

To find the right vanishing point on your right, draw a straight line from the center of your line of sight. This will create a midpoint between your two guiding principles.

Step 7:

source: lettering-daily.com

Your point of intersection should be where your farthest right vertical line intersects your middle guideline. This is a critical phase.

Your page should be divided diagonally from the top left corner to the top right corner.

Step 8:

source: lettering-daily.com

To determine the next letter size, draw a vertical line from your guideline’s top-most intersection with your diagonal line.

Make sure that it is always 90 ° away from the bottom of your page. Count up six boxes for our letters by repeating this step.

Step 9:

source: lettering-daily.com

Create some block letters in all of the boxes. A few guidelines can be made to help you identify the right vanishing point so you can keep your angles consistent.

Make sure your lines are straight by using a ruler. Your letters’ thickness (or weight) should become thinner as you move away from the vanishing point.

Step 10:

source: lettering-daily.com

Now that our letters are formed, we’ll use our left vanish point to give them more depth. From your ruler, draw a straight line to the left vanish point of each letter.

Simply continue drawing lines as needed until our letter meets the guideline we drew earlier that defined its depth. As with the letter’s front, the “C” must also be curved.

Let’s enlarge our drawing so you can see more details. Now that the guidelines have been removed, my letters are more visible.

Step 11:

source: lettering-daily.com

Don’t forget to pat yourself on the back if you haven’t already done so. You’ve done a great job!

Let’s finish it off with some ink and shading. Make a trace of the pencil lines using your black ink pen. Measure if necessary. 

Remove remaining pencil marks by carefully erasing them. You should let your ink completely dry before erasing to prevent smudging.

Step 12:

source: lettering-daily.com

Our focus today will be on simple shadows and we will progress to more realistic shadows in three stages: light, dark, and gradient. This piece will be illuminated from the correct vanishing point.

The 2B pencil, which blends more smoothly and doesn’t leave visible pencil marks when erased, is best for shading because it blends more smoothly. 

If you want your pencil to appear softer, you shouldn’t sharpen it all the way.

Let’s start with a pale hue. These can be found near the top of a flat horizontal surface if you look for them!

Step 13:

source: lettering-daily.com

In the next step, we will add deep shadows to the image. Left-handed surfaces can be found both horizontally and vertically. The small space to the left of the letter “T” at the top shouldn’t be overlooked.

Step 14:

source: lettering-daily.com

Lastly, we’re going to add some graduated shading to the surface we’re calling the foundation of our word. 

We can keep track of where the shading should be placed for the area coming out of the closet by using the “E” symbol. 

Starting at the deepest point, lighten your shadow gently to the desired lightness using the same method as before.

When shading, keep pencil marks to a minimum by blending with a finger or cotton swab.

Step 15:

source: lettering-daily.com

If necessary, remove any remaining guidelines. Once the shadow has been adjusted to your satisfaction, remove the remaining guidelines. The project is now complete!

Conclusion

It is a method of drawing words that appear as if they have depth and dimension. If you’re unfamiliar with perspective lettering, let me explain.  

As you stand on a street, you can view houses and buildings receding into the distance using a perspective lens.

The more familiar you are with angles and shadows, the more interesting your lettering pieces will be. 

If you practice these basic principles until they become second nature, your lettering will improve. Hope you’ve gained some insight into how to draw words now.

Leave a Comment

Exit mobile version